The garage door and the garage door opener are the two main components of a garage door.

Garage doors are a common feature of most buildings, and it is important for property owners to be informed of the minor issues that can arise with their garage doors, as well as the art of repairing them so that they are not strangled with a faulty door at an inconvenient time. Though you will need to call professionals like Garage Door Repair Roanoke to inspect and repair the garage door issues, there is nothing wrong in knowing about these most obvious problems to be able to do something from your end during an emergency.

Garage Door Repair Roanoke - Garage Door Issues

The spring tension is the main technology behind overhead garage doors. They roll up in sections or swing up as a single piece using this principle. Metal tracks are attached to the garage walls, and the doors move along these tracks. The spring or set of springs provides the necessary power for the movement. When you notice a problem with the doors, you should check the following items.

Inspect the garage for metal tracks. Survey the mounting brackets that secure the tracks to the walls. You can tighten the bolts and screws if they become loose. When you’re working inside the garage with the door closed, look for any dents, crimps, or flat spots. If you happen to notice them, you can pound them with a rubber mallet. You can also use a hammer or a scrap piece of wood. If the tracks are severely damaged, it may be time to replace them with new ones.

Examine the track alignment. Know that the horizontal tracks must slant slightly down towards the garage’s backside. When it comes to roll-up doors, the vertical section of the tracks must be precisely plumped. When you notice the tracks on the walls, they must be the same height. If there is an issue with the track alignment, loosen the screws and bolts and tap the tracks back into place. Check the tracks with level once more. Then, tighten the screws and bolts.

To clean the tracks, use a concentrated household cleaner to remove debris and hardened grease application.

Inspect for any loose hardware and tighten it. Check the plates at the point where the springs are mounted on swing-up doors to ensure the screws are tight. In the case of roll-up doors, check to see if the hinges are holding the sections of the door together. If the hinges are damaged, replace them; if the screws are loose, tighten them. If you notice the door sagging on one side, the hinges likely need to be serviced. If you discover that the screw hole has enlarged, replace it with a new screw that is longer and has the same diameter. Use a hollow fiber plug dipped in the carpenter’s glue to secure the new screw. If the wood near the hinges is cracked, remove the screws, fill the crack with wood filler, and allow it to dry before reinserting the screws. Before you call a professional, you can try these minor maintenance tasks yourself if you have the necessary tools and an interest.