Adjusting Garage Door Repair Southlake TX springs can be a dangerous task if not done properly, and it is recommended that a professional should handle it. However, if you have experience with tools and home repairs, you can try adjusting the garage door springs yourself.
Before we begin, it’s important to note that there are two types of garage door springs: extension springs and torsion springs.
Extension springs are located above the upper tracks on either side of the door and stretch to provide the lifting force. Torsion springs are located above the door opening and use torque to lift the door.
Step 1: Inspect the Springs
The first step in adjusting your garage door springs is to inspect them thoroughly. Look for signs of wear and tear, such as cracks, rust, or fraying cables. If you notice any of these issues, do not attempt to adjust the springs yourself. Call a professional garage door technician to replace the springs.
Step 2: Determine the Type of Spring
It is important to know whether you have extension springs or torsion springs. The method for adjusting them is different. If you are unsure of which type of spring you have, consult the owner’s manual or a garage door professional.
Step 3: Release the Tension
If you have extension springs, you will need to release the tension before making any adjustments. Start by opening the garage door completely. Use C-clamps to secure the door to the tracks to prevent it from moving. Find the safety cable attached to the spring and remove it from the bracket. Slowly and carefully loosen the two bolts that hold the spring in place. Be sure to hold onto the spring as you loosen the bolts, as it will be under tension.
Step 4: Make Adjustments
To adjust the tension of the spring, use a winding bar to turn the spring in the direction needed. Turning the spring in a clockwise direction will increase the tension, while turning it counterclockwise will decrease the tension. Make small adjustments and test the door after each adjustment until you reach the desired tension.
If you have torsion springs, do not attempt to adjust them yourself. Torsion springs are under extreme tension and can cause serious injury or even death if mishandled. Call a professional garage door technician to adjust the torsion springs.
Step 5: Reattach the Safety Cable
Once you have adjusted the tension on the extension spring, reattach the safety cable to the bracket.
Step 6: Test the Door
After making any adjustments, test the door to make sure it opens and closes smoothly. If the door is still difficult to open or close, make additional adjustments until it functions properly.
Step 7: Maintenance
To keep your garage door springs in good working order, perform regular maintenance. Lubricate the springs with a silicone-based lubricant every three months to reduce friction and prevent wear and tear. Check the springs for signs of wear and tear and replace them as needed.
In conclusion, adjusting Garage Door Repair Southlake TX springs can be a risky task, and it is recommended that you hire a professional to handle it. However, if you have experience with tools and home repairs, you can try adjusting the springs yourself. Remember to follow safety precautions and consult the owner’s manual or a garage door professional if you are unsure of what to do.
Dragon Garage Door & Gates
351 Central Ave #7, Southlake, TX 76092, United States
1-817-587-0445