Putting a Garage Door Repair Haslet TX back on track can seem like a daunting task, but with the right tools and techniques, it can be done easily and safely. Before we begin, it’s important to note that if you’re not comfortable with any aspect of this process, or if you don’t have the necessary tools, it’s best to call in a professional.

Step 1: Clear the area The first step is to clear the area around the garage door. This includes removing any items that may be in the way of the door, such as bikes, lawn mowers, or other tools.

Step 2: Disconnect the garage door opener Next, you’ll need to disconnect the garage door opener from the door. This will prevent the opener from trying to open or close the door while you’re working on it. To do this, locate the release mechanism on the opener and pull it down. You should then be able to manually open and close the door.

Step 3: Inspect the tracks With the door disconnected from the opener, you can now inspect the tracks to see if they’re damaged or misaligned. Look for any bends, kinks, or dents in the tracks, as well as any loose bolts or screws. If you find any issues, you’ll need to address them before attempting to put the door back on track.

Step 4: Align the tracks Assuming the tracks are in good condition, the next step is to align them properly. Start by loosening the bolts or screws that hold the tracks to the garage walls. You don’t need to remove them completely, just loosen them enough that you can move the tracks. Next, use a level to ensure that the tracks are perfectly vertical. If they’re not, you can gently tap them into place with a rubber mallet. Once they’re aligned, tighten the bolts or screws back up.

Step 5: Reinstall the rollers The next step is to reinstall the rollers onto the tracks. Start at the bottom of the door and work your way up, inserting each roller into the track as you go. You may need to remove the hinge that holds the roller in place in order to get it back onto the track. Once all the rollers are in place, test the door to ensure that it moves smoothly up and down the track.

Step 6: Adjust the tension If the door still isn’t moving smoothly up and down the track, you may need to adjust the tension. This is done using the spring system on the garage door. There are two types of garage door springs: torsion springs and extension springs. Torsion springs are located above the door, while extension springs are located above the horizontal tracks. The process for adjusting each type of spring is different, so be sure to consult your garage door manual or call a professional if you’re not sure how to do it yourself.

Step 7: Reconnect the garage door opener Once you’ve got the door back on track and adjusted the tension, you can reconnect the garage door opener. Simply pull the release mechanism back up until it clicks into place. Then, test the opener to ensure that it’s working properly.

In conclusion, putting a Garage Door Repair Haslet TX back on track is a fairly straightforward process, but it does require some knowledge and tools. By following these steps, you should be able to get your garage door back in working order in no time. If you’re not comfortable with any aspect of this process, or if you encounter any issues that you’re not sure how to handle, it’s best to call in a professional.

Haslet Best Garage & Overhead Door

817-242-5042