Replacing a Garage Door Repair Fort Lauderdale FL spring can be a daunting task, but with the right tools and instructions, it can be done safely and effectively.
In this guide, we will walk you through the step-by-step process of replacing a garage door spring:
Step 1: Determine the Type of Spring The first step in replacing a garage door spring is to determine the type of spring you have. There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are located above the garage door, while extension springs are located on either side of the door.
Step 2: Gather Tools and Materials Before you begin, you will need to gather the necessary tools and materials. This includes safety glasses, gloves, a wrench set, a socket set, a tape measure, a ladder, and a new garage door spring. Be sure to wear safety glasses and gloves throughout the process to protect yourself from any potential hazards.
Step 3: Release Tension on Old Spring If you have a torsion spring, you will need to release the tension on the old spring before you can remove it. This is done by inserting a winding bar into the winding cone and turning it to release the tension. Be sure to follow the manufacturer’s instructions for releasing tension, as this can be dangerous if done incorrectly.
If you have an extension spring, you will need to stretch the spring out to release the tension. This can be done by attaching a safety cable to the spring and securing it to the track. Once the cable is secured, you can remove the spring from the bracket.
Step 4: Remove Old Spring Once the tension is released, you can remove the old spring. If you have a torsion spring, simply loosen the set screws on the winding cone and slide the spring off the shaft. If you have an extension spring, remove the safety cable and slide the spring out of the bracket.
Step 5: Measure and Order New Spring After removing the old spring, you will need to measure the length of the spring and the diameter of the wire. This will ensure that you order the correct replacement spring. You can order a new spring from a local garage door supplier or online.
Step 6: Install New Spring Once you have your new spring, you can begin the installation process. If you have a torsion spring, slide the new spring onto the shaft and tighten the set screws on the winding cone. Be sure to wind the spring to the correct tension, following the manufacturer’s instructions.
If you have an extension spring, slide the new spring into the bracket and attach the safety cable to the track. Stretch the spring out to the correct tension and secure it in place.
Step 7: Test the Door After installing the new spring, test the garage door to make sure it opens and closes smoothly. If there are any issues, such as the door not opening or closing all the way, you may need to adjust the tension on the spring.
Step 8: Regular Maintenance To ensure the longevity of your new garage door spring, it is important to perform regular maintenance. This includes lubricating the spring with a silicone-based lubricant and inspecting it for signs of wear and tear.
In conclusion, replacing a Garage Door Repair Fort Lauderdale FL spring is a complex process that requires knowledge of garage door mechanics and safety procedures. With the right tools, materials, and instructions, you can replace a garage door spring safely and effectively.
Fort Lauderdale Garage & Overhead Doors
701 E Las Olas Blvd, Fort Lauderdale, FL 33301, United States
1-954-466-8785