If you have a broken or damaged glass pane in your garage door, it can be frustrating and dangerous. But with the right tools and materials, you can replace the broken glass on your own. I’ll guide you through the process step by step based from Garage Door Repair Raleigh NC.

First, gather all the tools and materials that you’ll need. You’ll need a putty knife, a glazing tool, a rubber mallet, a utility knife, gloves, safety glasses, glazing points, and a new glass pane that fits the dimensions of your garage door.

Next, put on your gloves and safety glasses, and use the putty knife to carefully remove any remaining glass fragments from the frame of the garage door. Then, use the utility knife to cut through the caulking or glazing around the edges of the damaged glass. Be careful not to damage the frame while doing this.

Once the caulking or glazing is removed, use the putty knife to pry the glass out of the frame. Be careful not to damage the frame while doing this.

Use a clean rag to wipe away any remaining debris or caulking from the frame of the garage door. Make sure the area is clean and dry before proceeding.

Place the new glass pane into the frame of the garage door, making sure it is centered and level. Use glazing points to hold the glass in place. Place the glazing points evenly around the perimeter of the frame, pushing them in with a glazing tool until they are flush with the frame.

Use a caulking gun to apply a bead of caulking or glazing around the edges of the new glass pane. Use the glazing tool to smooth out the caulking or glazing, making sure it is evenly distributed and covers the edges of the glass.

Allow the caulking or glazing to dry according to the manufacturer’s instructions. This usually takes between 24 and 48 hours.

Finally, test the new glass pane to make sure it is secure and functional. Open and close the garage door a few times to make sure the glass doesn’t rattle or move around.

Overall, as stated in Garage Door Repair Raleigh NC, replacing a glass pane in a garage door can be a daunting task, but with the right tools and materials, it’s a fairly straightforward process. Take your time, follow the steps carefully, and you’ll have your garage door looking as good as new in no time.

Raleigh Garage & Overhead Doors

1028 Oberlin Rd, Raleigh, NC 27605

919-443-6516